---
title: "Design Software Automatic Product Extraction Guide"
date: 2026-11-13
lang: en
url: https://archiboard.ru/blog/design-software-automatic-product-extraction-guide
---

# Design Software Automatic Product Extraction Guide

## Why automatic product extraction saves design studio time

Every interior project starts the same way: dozens of browser tabs, each holding a sofa, a tap, a tile or a pendant light that might make it into the scheme. The old routine is to copy the photo, retype the price, hunt for the SKU, note the dimensions and paste the lot into a spreadsheet. Multiply that by hundreds of items per project and the admin quietly eats hours that should go to design.

Design software automatic product extraction removes that step. You point the software at a supplier page and it reads the product details for you: the image, the price, the SKU, the description. The data lands in your project already structured, ready to be placed in a room and counted in an estimate. Time is only part of the gain. Manual entry is also where mistakes creep in, like a transposed digit in a price, a missing finish, a SKU copied from the wrong variant. Pulling data straight from the source page cuts those errors off where they usually begin.

It's the same idea behind the one-click clippers that sourcing tools now promote: save a product from almost any site with its image, price and specs intact, no hand-built spreadsheet required. ArchiBoard applies it inside a single workspace that also holds your estimates, room plans, tasks and team collaboration, so captured products never have to be shuffled between tools. If you want the wider picture of how sourcing tools connect to suppliers, our [design software with supplier integration guide](/blog/design-software-with-supplier-integration-guide) goes deeper.

The rest of this guide walks through a practical six-step workflow, from the first capture to a client-ready estimate and order tracking.

## Step 1-3: Capture products from supplier URLs with the AI Web Clipper

The AI Web Clipper is the engine of design software automatic product extraction in ArchiBoard. Here's how to use it across the first three steps.

**Step 1: Open the supplier page.** Browse as you normally would. When you land on a product worth considering, whether it's a freestanding bath, a parquet floor or a wall panel, stay on that page. There's nothing to download or copy. The clipper works from the page itself.

**Step 2: Clip the product.** Trigger the Web Clipper and let the AI read the page. It extracts the photos, the price and the SKU, plus the details a designer needs to specify the item properly. There's no form to fill in field by field. That's the whole point: the structured record appears without manual data entry.

**Step 3: Check and save.** Take a moment to confirm the captured details match what you saw on the page, especially for products with several variants such as sizes, finishes or colours. Then save the item to your project. A quick review is still good practice. Supplier pages differ in how clearly they present variants, and a few seconds of checking protects the accuracy of everything built on top of that item.

Not every product needs clipping. ArchiBoard also maintains a shared catalog of over 62,000 interior products across 16 categories, sourced from real supplier websites with brands, prices and dimensions. For common needs, start there and add items to your project directly, then use the clipper for anything outside the catalog: a specific piece a client found, or a niche supplier you work with regularly. You can browse the [full interior product catalog](/catalog) or go straight to a category such as [porcelain stoneware and tile](/catalog/porcelain_tile), [parquet](/catalog/parquet) or [wall panels and slats](/catalog/wall_panels) to see the kind of data each record carries.

To see what browser-based clipping looks like in general, extensions such as the [Interiors Manager Web Clipper](https://chromewebstore.google.com/detail/interiors-manager-web-cli/kfalfencpappdmmmkpndbinifjpoelef) and the [Houzz Pro Clipper](https://chromewebstore.google.com/detail/houzz-pro-clipper/lnhbnkmlkgeebjfimnbceakepeiandgg?hl=en-GB) show the same one-click principle that has become standard for sourcing workflows.

## Step 4-5: Organise items into per-room estimates with live multi-currency pricing

Once products are captured, the value comes from how fast they turn into a usable budget.

**Step 4: Assign items to rooms.** Place each captured product where it belongs: the sofa in the living room, the rainfall shower in the en-suite, the floor finish across the hallway and kitchen. Working room by room matches how clients think about their homes and how you phase procurement. It also means a change to one room, say swapping a bathroom tile, touches only that part of the estimate instead of forcing you to rebuild the whole document.

**Step 5: Let the estimate calculate itself.** ArchiBoard produces live estimates with per-room breakdowns. Add, remove or adjust quantities and the totals update. No separate spreadsheet to reconcile, no formula to break.

Multi-currency support matters more than it first appears. Interior projects routinely pull from suppliers in different countries: Italian lighting, Portuguese tile, a UK-made kitchen. Each lists prices in its own currency. Live multi-currency estimates let you keep items in their source currency and still see a coherent total in the currency your client pays in. That kills a tedious conversion step, and the risk of working from rates you converted weeks ago and forgot to refresh.

A few habits keep this stage clean:

- Capture the whole product family before you decide. Alternatives already in the project let you swap options without hunting for them again.
- Record quantities as you place items, so the room total reflects reality rather than a single unit.
- Use categories consistently. Finishes, plumbing, lighting and furniture behave differently when it comes to ordering and lead times, and consistent grouping keeps your later tracking tidy.

Because estimates, room plans and the product library all sit in one workspace, you move from sourcing to budgeting without exporting data from one tool and importing it into another. That's the practical difference between a purpose-built project platform and a stack of spreadsheets.

## Step 6: Share client-ready estimates while keeping margins internal

The sixth step is where many studios feel the friction. Clients need clear, professional numbers. They don't need to see your margins, mark-ups or cost basis, yet you and your team need that information to run the project profitably.

ArchiBoard handles this with role-based permissions. You collaborate with clients and colleagues in the same project while controlling what each role sees. Margins stay hidden from clients, so you can invite them to review selections, comment on options and approve items without exposing your internal commercial detail. Team members who need the full picture get it. Clients get a clean view built around what matters to them: what each room will contain and what it will cost.

When it's time to formalise things, export the estimate to PDF. The document reflects the per-room breakdown you've already built, so there's no last-minute reformatting. Because the data is live, the PDF you send comes from the same numbers your team is working with, which lowers the chance of a client holding an outdated version.

A few points keep this stage running smoothly:

- Set permissions at the start of a project, not after the client has already been invited.
- Keep internal notes and supplier details in the areas clients can't see.
- Export a fresh PDF whenever a significant change is approved, so everyone references the current numbers.

The result is a single source of truth that serves two audiences without you maintaining two versions of the same estimate. You stay transparent where it builds trust and private where it protects your business.

## Track orders with timeline tools and choose the right plan

Approval isn't the end of the job. Between a signed-off estimate and a finished room sit orders, lead times and deliveries, and this is where projects quietly slip when deadlines live in someone's head or an email thread.

ArchiBoard's timeline tools track order deadlines and delivery dates alongside the products themselves. Each item already sits in the project with its room and details, so you can see what needs ordering by when, what's in transit and what's due on site. That makes sequencing trades and deliveries easier: tiles must arrive before the tiler, and a bespoke piece with a long lead time needs ordering early. Task tracking and team collaboration live in the same workspace, so the person chasing a supplier and the person managing the site look at the same information.

**How to choose the right plan**

Choose based on how many people work in your projects and how much visibility you need into the business:

- **Starter (free):** The right place to begin. Use it to try the clipper, build a project and see how the workflow fits your practice before committing.
- **Pro (€20/month):** Built for solo designers who run their own projects end to end and want the full workflow without team overhead.
- **Studio (€100/month):** For teams that need multiple seats and advanced analytics, so several people can collaborate on projects while you keep an overview of the studio's work.

A simple rule of thumb: if you work alone, start free and move to Pro when your project volume justifies it. If you coordinate other designers, assistants or procurement staff, Studio gives you the shared access and analytics that team work needs.

The fastest way to judge design software automatic product extraction is to try it on a real project. [Create your free account](/register), clip a handful of products from suppliers you already use and watch an estimate build itself.
